Introduction:
This application allows you to define, enter and manage all the information about each of the lots in a Site Plan (including Models that fit, lot premiums, lot conditions, architectural controls, etc.). This information will be pulled into all your touchpoints (website, touchscreen, etc.)
The Site Plan Configurator (SPC) is synced with both the Home Model Configurator (HMC) and Inventory & Price Management (IPM) to provide real-time status on lot availability.
!! You can’t Layout or Stylize your Site Plan with the Site Plan Configurator (SPC). You do this with the Website & Landing Page Builder (WLPB) and the Touchscreen Builder (TB) -if included in your package-.
!! Heads-Up
Our Table of Contents links might occasionally land you Just Below The Target Section. If this happens, a Simple Scroll Up to the Previous Section will get you right where you need to be.
TABLE OF CONTENTS
- Get Started
- Upload your Site Plan Base Image(s)
- Automatically Configure the Lots and Their Information Using Data Import
- Manually Configure the Lots
- The Site Plan Configurator Tool Box
- Draw the Lot Polygons
- Enter the Number of the Lot you just Configured
- Complete the Lot Details and Choose the Home Models that Fit the Lot
- Deactivate Architectural Rules
- Mark a Lot as Standing Inventory and Add an Image to the Lot
- Enter Lot Relations
- To enter Lot Relations, scroll down to the Lot Relations Section
- Add Grading Information
- Configure Custom Lot Gradings
- Set Default Lot Conditions/Premiums
- Assign the Default Price to a Lot Condition/Premium
- Add Custom Lot Conditions/Premiums
- View and Edit your Lots
- Delete Lots
- Add Community Amenities
- Delete Community Amenities
- Manage Lot Gradings and Lot Conditions/Premiums from the Settings
- Settings - Data Management
- Settings - Broker Access
Get Started
Launch the Site Plan Configurator (SPC)
Go to the project’s Workplace,
Under Product Management, find the Site Plan Configurator (SPC)
Click on it
Enter Architectural Rules (not mandatory at this point)
If you already have the Architectural Rules available, select the Details from the Dropdown Menus
If you Do Not Have this information available, scroll down and click Maybe Later to enter this information later
To deactivate architectural rules for a particular model, follow These Steps:
!! Once you are ready to Enter the Architectural Rules,
Click the Architectural Rules Button at the Top of the Main Screen. If you need to edit them, click this button as well.
!! Architectural Rules are NOT APPLICABLE to either Group or Corporate Projects.
Edit Architectural Rules (not applicable to either Group or Corporate Projects)
To edit Architectural rules, go to the left navigation bar and select Site Plan Lots or Community Amenities to go to the main screen
At the Top of the Main Screen, click Architectural Rules
On the Edit Architectural Rules drawer, make the necessary changes, then click Update
Upload your Site Plan Base Image(s)
Read This Before you Upload the Base Image(s)
!! Why are there two map images?
There are two types of Site Plan images, one is a Standard Resolution Image, which is a lower quality image but crisp enough to use on Smaller Screens like Web or Mobile, and one is a Higher Resolution Image, which is a higher quality image for use on Larger Screens like Touchscreens and Tabletops.
!! Make sure the two images have the exact Aspect Ratio.
The Aspect Ratio is the Proportion of width to height. In other words, if you put one map on top of the other, all the lots need to fall in the same place.
Upload the Base Image(s)
On the Web/Mobile section, click Add Image
The Media Library opens
From the Media Library, select your Standard Resolution Image
Click Select
If you need to Upload a Touchscreen / Site Plan Table image, then click on the Touchscreen / Table section
From the Media Library, select your Higher Resolution image and click Select
Once the images are uploaded, click Ok
!! About Uploading to the Media Library:
If you have not uploaded the Site Plan Images to your Media Library yet, you can upload them now using the Content Asset Management System (CAMS). If you don’t know how to upload to the Content Asset Management System (CAMS), please Follow These Steps. For Optimal Performance, please follow our Asset Preparation Guidelines when preparing your assets.
!! About File Formats and Folders:
Different Sections of the Bildhive Platform require you to upload files in Specific Formats. When a section requires a jpeg/png Format, only those Folders Containing jpegs/pngs will be Displayed on the left-hand navigation bar. If the section requires pdf format, then only the Folders that Contain pdfs will be Displayed when accessing the Media Library from that Specific Section of the platform.
!! Can I update the Base Image?
During the life cycle of a community, the Site Plans often Change. You can always Update your Base Image as long as the Aspect Ratio* of Both Maps are the Same. To change/update your Site Plan Base Image(s) follow these steps:
Update/ Change your Site Plan Base Image(s)
Go to the Tool Box on the left of the Main Stage
At the bottom of the Tool Box, select the Change the Base Image tool
On the Site Plan Base Image Dialogue Box pop-up, click the Image that you want to Change
The Media Library opens up
From the Media Library, select the Image that you want to use
On the Site Plan Base Image dialogue box, press OK
!! What is the Aspect Ratio?
The Aspect Ratio is the Proportion of width to height. In other words, if you put one map on top of the other, all the lots need to fall in the same place.
!! If you have not uploaded your Site Plan Base Images to your Media Library yet, you can upload them now using the Content Asset Management (CAM). If you don’t know how to upload to the Content Asset Management (CAM), please Follow These Steps. Make sure to follow the Bildhive Asset Preparation Guidelines when preparing your assets.
!! Different Sections in the Bildhive Platform require you to upload files in Specific Formats. When a section requires a jpeg/png Format, only those Folders Containing jpegs/pngs will be Displayed on the left-hand navigation bar. If the section requires pdf format, then only the Folders that Contain pdfs will be Displayed when accessing the Media Library from that Specific Section of the platform.
Automatically Configure the Lots and Their Information Using Data Import
When you Configure the lots using Data Import, you need to Import the Data First, and then Draw the Polygons and Map them to their corresponding Lot. you can also configure your lots Manually.
Set up Custom Fields
Although Bildhive provides you with a comprehensive list of Default Fields, we cannot anticipate all your needs, so we have provided you with the option to add Custom Fields. If necessary, add Custom Fields BEFORE importing your Data.
To add a Custom Field, go to the Left Navigation Bar and select Settings
In the Submenu, under Customization, click Custom Fields
Go to the Bottom of the page and click Add Custom Field
In the New Custom Field pop-up, Add a Name*, a Field Type*, and, if required, a Default Value
Click Add Field
Repeat this process for all fields you need to add
*Mandatory Fields
!! Open the file below for a List of Default Fields in the Site Plan Configurator.
The file Headers represent the Default Fields.
Data Template for Site Plan Configurator (SPC)
Organize your Excel File
Builders have their unique approaches to Organizing data files in Excel. Even though it is not Mandatory, it is recommended that you reorganize your files following Bildhive’s SPC Import Data Template to ensure a Smooth Data Import.
Use this file as a Template: SPC-TEMPLATE to Import Lots
Use this file as a Sample: SPC-SAMPLE file to Import Lots
Make sure NOT TO USE SPECIAL CHARACTERS, like dashes, quotation marks, etc, when filling in your data
If a field in the Excel file does not apply to the unit in question, leave it Empty
Once it is ready, Save the Excel File as a .CSV
!! Why is it recommended to follow Bildhive’s File Structure?
Importing data into Bildhive requires Mapping the Headings in your document To Fields in the Site Plan Configurator. By following Bildhive's File Structure, this mapping becomes Straightforward.
Save your File as a CSV
Bildhive Requires CSV format for Data Import
Once your Excel file is Ready, do the following to save it as a CSV
If you are using a Mac, go to the Top Bar and click File, then select Download, and from the Submenu, select Comma Separated File (.csv)
If you are using Microsoft, switch to the File tab, then select Save As, and from the dropdown select CSV Comma Delimited file
Unless you specify otherwise, your file is Saved in your Downloads Folder
!! What are CSV files and why do we need them?
A CSV is a comma-separated values file. These files are used to export and organize a high volume of data. It is a spreadsheet that contains a.csv extension.
Import your CSV File
On the Left Navigation Bar, click Settings
In the Submenu, on the Data Management section, select Manage Data
Make sure the Import from CSV tab is Selected
Click Browse to open your Asset Library
If you’ve already Uploaded your CSV file, select it and then click Select
Otherwise, Upload it now
!! Check if your upload was successful.
Once the upload is done, open Settings, select Manage Data, at the Top, select the History Tab, Find the Date Column, click the Down Arrow to show the Latest at the top, and check the Status.
!! What does the Maximum Number of Upload Records Mean?
When you upload a CSV file to Bildhive, it is essential to note that it should contain less than 15,000 rows -excluding the column headers. If your CSV file has more than 15,000 rows, divide it into smaller files and upload them separately.
Map the Headings
Once you Select your file, the Import from CSV window opens
On the Left Side, you will see a list of Headings
Each Heading represents a Column in the CSV file
On the Right Side, there is a series of Dropdowns with a list of the Fields in the Site Plan Configurator
Begin by Mapping the Initial Heading—simply click on the dropdown menu directly opposite it
From there, Choose the Field that Aligns with the heading
This action will automatically Populate the corresponding Field in the Home Model Configurator with the Data from the column in your CSV file
Continue Mapping the rest of the Headings with their corresponding Fields
Fields are in Alphabetical Order
Select Ignore if you don’t want a field to Populate
Select Preview to check how the fields are going to be mapped
Select Import to populate the fields with the data
Once the Data is Imported, the list of Lots populates the Left Navigation Bar
Click on a Lot to view it’s information
Once you import the Data, you need to Draw the Lot Polygons and Map them to their Lot Information
!! Not all the information can be uploaded with the Data Import.
You will need to enter some information manually, like the home models that can be built on each lot, etc.
Check if the Import was Successful
Once you select Import, a notification slides in informing you if the import was completed
It is also good practice to go to Manage Data/ History Tab where you can check whether the import was a Success or a Fail (and the reason why it failed)
As well, you will receive an Email informing you, when an Import Fails and the reasons why
If you have questions, contact [email protected]
The Site Plan Configurator Tool Box
Info: Before cutting the lots, learn about the Tools in your Tool Box:
Use the Spyglass with a Plus tool to Zoom Into an area
Use the Spyglass with a Minus tool to Zoom Out
Use the Arrow tool to select,
Use the Hand tool to Pan the Map around
Use the Empty Square tool (Lot Polygon) to Cut Lots
Use the Square with Star tool (Amenity Polygon) to cut Amenity Lots
Use the Pen tool to Delete an Anchor Point
Click 1:1 To Reset the Canvas Zoom and Re-Center the map
Click on the Image Icon to Update/Change your Base Image(s)
Draw the Lot Polygons
To Draw a Lot Polygon, find the Toolbox to the left of the map and select the Lot Polygon
Click on Each of the Corners of a lot to add Points
Click on the Start Point to Close the Polygon and open the Lot Drawer or click Enter to close the shape and open the Lot Drawer
!! Do you need to Adjust the Polygon?
Do one of the following:
To Delete Points in a polygon, select the Delete Anchor Point Pen (pen with a minus) and click on the point you want to delete.
To Add Points to a Closed Polygon, Click on the Spot where you want to add a point.
To Adjust the Shape of a Polygon, Click on a point and Drag it.
Map Each Lot Polygon to Its Lot Information
Once the Lot Drawer Opens, scroll to the top of the drawer find the Map Lot Polygon to Existing Lot dropdown, and select the corresponding Lot Number
This links the Information to the Polygon
Import New, Additional, or Adjusted Data
Ideally, the Import process should be done Once at the Start of a Project
For Minor Updates, it's best to Add information Manually
However, if you Need to do Another Import, enter the data in the template, save it as a CSV file, and then import it into Bildhive
This will Update any Fields that Match Existing Mapped Information
!! Heads-Up:
Fields will be Overwritten with the new data. When you import entirely NEW DATA, the existing information will remain Unaffected.
Manually Configure the Lots
When you configure the lots Manually, you need to Draw the Polygon First and then enter the Lot Information. Alternatively, you can import Data to configure the lots Automatically
The Site Plan Configurator Tool Box
Info: Before cutting the lots, learn about the Tools in your Tool Box:
Use the Spyglass with a Plus tool to Zoom Into an area
Use the Spyglass with a Minus tool to Zoom Out
Use the Arrow tool to select,
Use the Hand tool to Pan the Map around
Use the Empty Square tool (Lot Polygon) to Cut Lots
Use the Square with Star tool (Amenity Polygon) to cut Amenity Lots
Use the Pen tool to Delete an Anchor Point
Click 1:1 To Reset the Canvas Zoom and Re-Center the map
Click on the Image Icon to Update/Change your Base Image(s)
Draw the Lot Polygons
To Draw a Lot Polygon, find the Toolbox to the left of the map and select the Lot Polygon
Click on Each of the Corners of a lot to add Points
Click on the Start Point to Close the Polygon and open the Lot Drawer or click Enter to close the shape and open the Lot Drawer
!! Do you need to Adjust the Polygon?
Do one of the following:
To Delete Points in a polygon, select the Delete Anchor Point Pen (pen with a minus) and click on the point you want to delete.
To Add Points to a Closed Polygon, Click on the Spot where you want to add a point.
To Adjust the Shape of a Polygon, Click on a point and Drag it.
Enter the Number of the Lot you just Configured
Once the Add New Lot Drawer opens, Enter the Lot Number*
in the Lot Number Field under the Lot Details Section
Click Create
Repeat the Steps for Each of your Lots
* Mandatory fields
!! A Tip from Experienced Users.
Experienced Bildhivers often find it convenient to add only the Lot Number and Save the Lot, then complete the details later. No matter your workflow preference, Make Sure to Click CREATE Before you Close the Lot Drawer, otherwise, you will Lose your Information.
Complete the Lot Details and Choose the Home Models that Fit the Lot
Enter the Block # if applicable
Enter the Tentative/Firm Close Date
Or, move the Dynamic Termination Date slider to the right
To apply the number of days entered in this field to the deal’s Initiation Date and calculate the Closing Date
When ready to display a lot in your Touchpoints, change the Publishing status from Draft to Published
Enter Tags
Enter Primary Address: Street Number, Name, Postal Code, City, Province, and Short Legal Description or Plan Number
Enter Secondary Address, for live-work units, for example
From the Dropdown Menu, choose all Home Models that Fit This Lot
Enter Model Type and Lot Frontage
!! You Don’t See the Home Model you are Looking for?
The dropdown menu lists ONLY the Home Models that have already been Configured with the Home Model Configurator (HMC).
Info: About Interactive Maps:
You will have the Option to make your map Interactive on your website, touchscreen and other touchpoints. This means that, when you click on a lot, it will display the Home Models that fit on it.
Deactivate Architectural Rules
To deactivate the Architectural Rules, Slide the Deactivate the Architectural Rules button to the Right
!! If you have two identical townhome models situated besides each other, you should Deactivate the Architectural Rules in those models.
!! Read This BEFORE you mark a model as Standing Inventory
When your home transitions to standing inventory, start by generating a fresh entry in Bildhive for the particular Model. Take, for instance, the Danika Home Model designed for lots 2, 3, and 4. If a buyer initially selects Lot 4 for their Danika Model but later changes their mind, resulting in the home becoming standing inventory, distinguish it by duplicating the Model exclusively for Lot 4 and labeling it Danika-SI. Follow the instructions below to designate it as a standing inventory.
Mark a Lot as Standing Inventory and Add an Image to the Lot
To mark a Lot as Standing Inventory, Slide the Standing Inventory button to the Right
To add an Image to the Standing Inventory, go to the Left Navigation Bar, select Site Plan Lots
Find and roll over the Lot for which you need to add an image
Open the Three-Dot Action Menu and select Edit Lot
Scroll down to the Gallery Images section and select Add Image this opens your Media Library
Select the previously uploaded image
Click Update
!! A Standing Inventory Lot can only have One Home Model and Elevation assigned to it.
Info: About the Lot Relations Section
In this section, you must enter which lot sits in front of the lot you are configuring, which lot sits to the left and which lot sits to the right. It is important to enter the Lot Relations in order to Comply with the Architectural Rules.
Enter Lot Relations
To enter Lot Relations, scroll down to the Lot Relations Section
From the Dropdown menus, select the Lot Front, Lot Left and Lot Right and Indicate whether the Lot is Attached
!! Watch Out for Attached Homes, Like Semis and Townhouses
Attached homes Need to Have the Same Exterior Package, so it's crucial to indicate whether this is the case.
!! Where to find the Information for the Lot Gradings Section?
The Siting Analysis lists the Grading along with other information for this section, such as
Garage Side–the location of the garage with respect to the house.
Risers at Garage–the number of stairs from the garage to the house. This can be a range.
Risers at Front–the number of stairs at the front of the house. This can be a range.
Risers at Rear–the number of stairs at the rear of the house. This can be a range.
Easement–This refers to a particular legal situation when a piece of the property belongs to someone else (the city, for example), but the owner of the house is allowed to use it.
Add Grading Information
Garage Side (select from the drop-down menu or add a new option if not listed)
Risers at Garage
Risers at Front
Risers at Rear
Checkmark if the lot contains an Easement
Info: You can add a Custom Lot Grading.
Follow these steps if the lot has other Lot Conditions not Listed:
Configure Custom Lot Gradings
Click on the Add Lot Gradings Button
Enter a Name* in the field
Click Add Grading
Checkmark the new Field
* Mandatory fields
!! When a Custom Lot Grading Field is added, it will appear as an option in All the lots in the project. Simply Check Mark the field in any lot that it applies to. To Edit/Delete a Custom Grading, Follow These Steps:
Info: About Lot Conditions
There are certain Conditions and Characteristics of a lot that warrant a Premium Cost, for example, backing out to a Conservation Area or having a Walk-out-deck. Bildhive provides a Default List of Lot Conditions/ Premiums to select from.
Set Default Lot Conditions/Premiums
To Select a Lot Condition/ Premium, Scroll down to the Lot Conditions/ Premiums Section of the Lot Drawer
From the Default List provided, Select the option that applies to the Lot
If a Default Price was assigned to the Lot Condition/ Premium, it will appear in the price field
To Overwrite a price, Click on the Price Field and Enter the new price
!! If you Overwrite the Price from Here,
It will ONLY apply to this Specific Lot
Assign the Default Price to a Lot Condition/Premium
To Assign a Default Price for a Lot Condition/ Premium go to the Navigation Menu to the Left of the screen, and click Settings
From the Submenu that opens up, click Lot Conditions/ Premiums
In the Lot Conditions/ Premiums List, find the Entry for which you want to set the Default Price
To the Right of the entry, click the Pencil
In the Edit Lot Condition/ Premium Pop-up, add the Price that you want to appear as Default
At the Bottom of the pop-up, click Update Premium
Add Custom Lot Conditions/Premiums
To add custom Lot Conditions/ Premiums, scroll down
Below the Lot Conditions/ Premiums list, click Add Lot Conditions/Premiums
In the New Lot Condition/ Premium pop-up, provide a Name*
If this lot requires a specific price for the Condition, you can overwrite the Default Price by Entering a new price in the field
Click Add Condition/Premium
Close the Add New Lot Condition/ Premium Pop-up
Scroll to the end of the Lot Conditions/ Premiums section
Find the new Custom Field and Select it
* Mandatory fields
!! When a Custom Lot Conditions/Premiums Field is added, it will appear as an option in All the lots in the project. Simply Checkmark the field in any lot that it applies to. To Edit/Delete a Custom Field, go to Step 14.
View and Edit your Lots
Info: About the Lot List,
As you create them, your lots are listed inside the Lots List. To View your Lot List, and Edit a Lot, Follow these steps:
On the Navigation Bar to the Left side of your screen, click Site Plan Lots
This will Open the Site Plan Lots Drawer where the lots you have configured are listed in Ascending Numerical Order
To Edit a Lot, Roll over the Lot
Click the 3-Dot Action Menu
Select Edit Lot
In the Edit Lot Drawer, make the necessary changes
To Save the Edits on your Lot, click Update
Delete Lots
Delete a Lot From Inside the Edit Lot Drawer
To Delete a Lot when inside the Edit Lot Drawer, go to the bottom left of the drawer and click Delete Lot
Delete a Lot From the Lot List
Go to the left-hand Navigation Menu, and click Site Plan Lots to open the Site Plan Lot Drawer
In the Site Plan Lot Drawer, Roll Over the Lot that you want to Delete
Click the 3-Dot Action Menu
Select Delete Lot
In the Delete Pop-up, click Delete
Bulk Delete Lots
Go to the left-hand Navigation Menu, and click on Site Plan Lots to open the Site Plan Lot Drawer
In the Site Plan Lot Drawer, Click the Square to the left of the lots that you want to Delete
Once your lots are check-marked, go to the top of the list and click Bulk Delete
Click Bulk Delete
To Delete All The Lots in the list, click the Square next to Site Plan Lots at the top of the Lot List
Add Community Amenities
Info: In the Site Plan, you can identify Community Amenities (such as parks, schools, tennis courts, etc.) and Upload Images or Videos that will Display when the amenity is Clicked in the website, touchscreen, etc.
Configure a Lot for a Community Amenity
From the Toolbox, select the Amenity Polygon (square with a star)
Click on Each of the Corners of a Community Amenity Lot to add Points
Click on the Start Point or click Enter, to Close the Polygon and open the Add New Amenity Drawer
Enter a Label for your Amenity*
Enter a Description of the Amenity
You can Upload an Amenity Featured Image by selecting it from your Media Library
You can upload an Amenity Video or Animation by selecting it from your Media Library
Click Create
* Mandatory fields
!! Do you need to Adjust the Polygon?
Do one of the following:
To Delete Points in a polygon, select the Delete Anchor Point Pen (pen with a minus) and click on the point that you want to delete.
To Add Points to a Closed Polygon, Click on the Spot where you want to add a point.
To Adjust the Shape of a Polygon, Click on a point and Drag it.
!! About Uploading to the Media Library:
If you have not uploaded the Amenity Images to your Media Library yet, you can upload them now using the Content Asset Management System (CAMS). If you don’t know how to upload to the Content Asset Management System (CAMS), please Follow These Steps. For Optimal Performance, please follow our Asset Preparation Guidelines when preparing your assets.
View and Edit your Amenities
Info: About the Amenities List,
As you create them, your Amenities are listed inside the Community Amenities List. To View your Community Amenities List, and Edit an Amenity Lot, Follow these steps:
On the Navigation Bar to the Left side of your screen, select Community Amenities
This Opens the Community Amenities Drawer where the amenities you have configured are listed
To Edit an Amenity, locate it on the List and Roll over it
Click the Three-Dot Action Menu
Select Edit Amenity
In the Edit Amenities Drawer, make the necessary changes
To Save the Edits, click Update
Delete Community Amenities
Delete an Amenity From Inside the Edit Amenity Drawer
To Delete an Amenity when inside the Edit Amenity Drawer, go to the bottom left of the drawer and click Delete Amenity
Delete an Amenity From the Amenity List
In the left-hand Navigation Menu, select Community Amenities
In the Community Amenities Drawer, Roll over the Amenity you want to delete
Click the 3-Dot Action Menu
Select Delete Amenity
In the Delete Pop-up, click Delete
Bulk Delete Amenities
Go to the left-hand Navigation Menu, and select Community Amenities to open the Community Amenities Drawer
In the Community Amenities Drawer, Click the Square to the left of the amenities you want to Delete
Once your amenities are check-marked, go to the top of the list and click Bulk Delete
To Delete All The Amenities in the list, click the Square next to Community Amenities at the top of the Amenities List
Click Bulk Delete
Info: You can Assign a Color to identify both your Lot Types and your Amenities in the Site Plan Legend on the Website, Touchscreen, etc. These Colors Should Align with the colors in the Base Map. In the Site Plan Configurator, lots will continue to be highlighted in orange. The Colors selected are ONLY used on the Site Plan Legend when the Site Plan is displayed on the website or touchscreen.
Assign a Color to Identify the Lot Types and Amenities in the Site Plan Legend
At the Top of the Main Stage, click Colors
In the Color Settings Drawer, Select a Lot Type and enter a Color Value for that Lot Type
Repeat the process with the Rest of the Lot Types
To define your Amenity Colors, select an Amenity Label and Enter a Color Value for the Amenity
!! About the Lot Types and Amenity Labels,
The Lot Types are pulled from the Model Type information you Enter on the Home Model Configurator (HMC). The Amenity Labels come from the Names that you Enter when configuring your Amenity.
Manage Lot Gradings and Lot Conditions/Premiums from the Settings
Edit/ Delete Lot Gradings
Go to the Navigation Menu to the Left of the screen, and click Settings
From the Submenu that opens up, click Lot Gradings
In the Lot Gradings List, find the Entry you want to Edit/ Delete
To the Right of the entry, click the Pencil / Trash Can
Adjust the information and click Update Premium
Or confirm Delete
Edit/ Delete Lot Conditions / Premiums
Go to the Navigation Menu to the Left of the screen, and click Settings
From the Submenu that opens up, click Lot Conditions / Premiums
In the Lot Conditions / Premiums List, find the Entry you want to Edit/ Delete
To the Right of the entry, click the Pencil / Trash Can
Adjust the information and click Update Premium
Or confirm Delete
!! Why Is There No Trash Can Next to the Premium?
Default Conditions / Premiums cannot be Deleted, so there is no trash can. They can only be Edited. Custom Conditions / Premiums, however, can be both Deleted and Edited.
!! You Can’t See your Custom Premiums?
They may be on the Next Page of the Lot Conditions/ Premiums List. To navigate between pages, Scroll Down the list and Click the Arrows.
Add, Edit, Delete Custom Fields
Go to the Navigation Menu to the Left of the screen, and click Settings
From the Submenu that opens up, under Customization, select Custom Fields
At the Bottom of the Custom Fields window, click Add Custom Field
In the Add Custom Field pop-up, enter a Name*
Click Required if you want the field to be Mandatory
Select a Field Type*
Enter a Default Value if necessary
Click Create
* Mandatory fields
Settings - Data Management
Import Data from a CSV File
If you have Custom Fields in the File you are about to import, please Set Them Up BEFORE importing the Data
Reorganize your Excel File following Bildhive’s SPC Import Data Template to ensure a Smooth Data Import
Use this file as a Template: SPC-TEMPLATE to import Lots
Use this file as a Sample: SPC-SAMPLE file To Import Lots
Then, Save your Excel File as a CSV
Once you’ve prepared your file, go to the Left Navigation Bar, and click Settings
In the Submenu, under the Data Management section, select Manage Data
Make sure the Import from CSV tab is Selected
Click Browse
Select the CSV file from your Asset Library and click Select
Map the Headings of your CSV file to the Fields in the Dropdowns
Select Ignore if you don’t want a field to Populate
Select Preview to check how the fields were mapped
Select Import to populate the fields with the data
!! What does the Maximum Number of Upload Records Mean?
When you upload a CSV file to Bildhive, it is essential to note that it should contain LESS than 15,000 rows -excluding the column headers. If your CSV file has more than 15,000 rows, divide it into smaller files and upload them separately.
!! Do you need to import Additional, Adjusted, or New Data?
Export Data to a CSV File
On the Left Navigation Bar, below Lots and Community Amenities, select Settings
In the Submenu, under the Data Management Section, select Manage Data
Make sure the Export Data tab is Selected
Select the Name of the Data you want to Export then, from the Actions Column, click the Download CSV Icon
View Data History
On the Left Navigation Bar, below Lots and Community Amenities, select Settings
In the Submenu, under the Data Management Section, select Manage Data
Make sure the History tab is Selected
Settings - Broker Access
Make Your Lot Inventory Available to Brokers
To allow Brokers to have Access to your Lot Inventory, go to the Left Navigation Bar
Under Broker Acces, click Preferences
In the Broker Access Preferences section, slide the Enable Broker Access slider to the Right
Once you do this, the Exclude Specific Lots field appears
Select the Lots you do not want the brokers to Access
!! Can't see the list of lots to exclude?
You MUST CONFIGURE your lots before selecting the ones you want to exclude.
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article